The Light my Bricks Multi Kit Connection Pack allows multiple Light my Bricks Light Kits from the LMB 1.0 and LMB 2.0 systems to be connected together and powered from a single power source.
The Multi Kit Connection Pack contains a curated selection of LMB 2.0 components designed to make it easy to connect multiple Light my Bricks Light Kits. A single Multi Kit Connection Pack can connect up to 7 Light Kits. When multiple Connection Packs are linked together, each additional pack can accommodate up to 6 additional Light Kits.
The included Split Docks distribute the connection across multiple components, while the 50 cm Belts provide plenty of flexibility for connecting areas or models that are positioned further apart. The included Tethers allow the Docks to be mounted compactly and discreetly within the model, helping to create a clean and organised installation.
Thanks to the included Converter Dock, existing LMB 1.0 Light Kits can also be connected to components from the new LMB 2.0 system. The Converter Dock acts as the bridge between the two generations of the system, allowing existing Light my Bricks lighting to continue to be used and combined with new LMB 2.0 components.
Developed from over 10 years of experience
Light my Bricks has been developing lighting solutions for LEGO® sets for over 10 years. The experience gained during this time has been incorporated directly into the development of the new LMB 2.0 system. The components were developed by Light my Bricks to make them even smaller, thinner, more robust and easier to integrate into LEGO® models. The innovative design of the Light my Bricks 2.0 system has been recognised with a Good Design Award.
Contents:
- 4 x Belt – flat flex cable, 50 cm
- 3 x Split Dock – for distributing the connection across multiple LMB 2.0 components
- 3 x Tether – 1x4 connecting plate
- 1 x Tether – 1x2 connecting plate
- 1 x Converter Dock – for connecting LMB 1.0 with LMB 2.0
Technical specifications:
- Compatibility: Light my Bricks 1.0 and Light my Bricks 2.0
- Number of Light Kits: up to 7 with one Multi Kit Connection Pack
- Expansion: multiple packs can be linked together, supporting up to 6 additional Light Kits per additional pack
- Included Belt length: 50 cm
- Power supply: 5 V / 2.4 A
Power supply information: These components are designed for a 5 V / 2.4 A power supply. Only use a Light my Bricks power adapter or power bank that meets these specifications. The use of other power sources, particularly higher-voltage adapters, is at your own risk.
Easy Plug-and-Play system
Light my Bricks 2.0 components are designed to connect easily to one another. Unlike many conventional lighting components, there is no need to pay attention to positive and negative polarity when connecting LMB 2.0 components. Simply plug in and connect – the system takes care of the rest. No electronics knowledge or complicated settings are required.
The Multi Kit Connection Pack is therefore a practical solution for larger LEGO® displays, multiple connected models or extensive Light my Bricks installations that need to be neatly connected and powered from a single power source.
| Item information |
Value |
| Age from: |
14 years |
Light My Bricks is the market and technology leader in high-quality lighting systems for LEGO® models. The brand was created by genuine LEGO fans with one clear goal: lighting should not look like an add-on, but should integrate cleanly, discreetly and seamlessly into the model.
With its modern LMB 2.0 system, Light My Bricks sets new standards. Ultra-thin flexible cables, precise connectors, high-quality LEDs and specially developed components allow for an exceptionally professional installation. The cables disappear almost invisibly between the bricks, while the lights are positioned exactly where they enhance the model with atmospheric and authentic illumination.
Each lighting kit is developed specifically for the corresponding LEGO® model. Light My Bricks takes inspiration from the details of the original – whether it is based on a movie, architecture, a vehicle or a real-world reference. The result is a lighting concept designed not simply to make a model brighter, but to specifically enhance its atmosphere, depth and overall visual impact.
One of the key differences compared with many simpler lighting systems is the quality of the integration. While many other providers continue to use conventional wires and relatively basic installation solutions, Light My Bricks is designed to provide the cleanest, most refined and build-friendly experience possible. The detailed step-by-step instructions closely resemble the style of official LEGO® building instructions. This means that many kits can be installed either while building the model or added afterwards.
Light My Bricks therefore stands for far more than LED lighting alone. The brand offers a sophisticated premium system for discerning LEGO fans who do not want to alter their model, but present it at its very best – with technology that remains as invisible as possible and lighting that impressively highlights the character of the set.
